AEROLINE® INOX TERRA HP 40

For heat pumps installed outside.

Terra WP 100

 

• Modular turn-key system

 

• Double walled tube construction provides best protection against water ingress


• Exchange spacers for up to two control and sensor wires (5 - 15 mm) with plugs
   (up to a diameter of 45 mm)


• Highest thermal insulation properties thus better energy yield


• Internal fixing of the corrugated stainless steel tubes

 

• Appropriate also for heat pumps with reversible (cooling) operation

 

Heat pump piping system, consisting of:

Jacket pipe made of PE-HD; two corrugated stainless steel tubes (feed and return);

PE protection film; one electric power installation tube 32; a pull-in aid for manufacturer specific control and sensor cables with plugs up to a diameter of 45 mm;

two underground warning tapes (heating line/power cable).

The entire system is appropriate for water and water-tyfocor mixtures.

The maximum temperature range is of -30°C up to +95°C.

Thermal protection:

Reference values of thermal conductivity at +40 °C, λ40°C = 0,040 (0,037*) W/mK,

at 0 °C, λ0°C = 0,033 W/mK.

Corrugated stainless steel tube:

Material no. 1.4404; maximum working pressure at 95°C DN 25/10 bar, DN 32/6,5 bar, DN 40/4,4 bar; 
Bursting pressure: DN 25 higher 33 bar, DN 32/DN 40 higher 20 bar.

Jacket pipe:

The double-walled cable liner pipe is made of PE-HD;

the ring stiffness is according to DIN 16961, SR24≥ 16,0 kN/m2;

Minimum bending radius: 42,5 cm (DN 25) and 50 cm (DN 32/DN40);

Power installation tube: Power installation tube 32 (inner diam. 22 mm) according to DIN EN 50086,
for control, sensor and power cables.

Insulation AEROFLEX-tube, made of EPDM: Light, flexible, closed-cell synthetic rubber; free of PVC and CFC. Building material code: B2 according to DIN 4102. No embrittlement of copper and stainless steel tubes according to DIN 1988 Part 7;


The tubes are marked in order to avoid confusion between feed and return.

 

*exact measured values FIW-Munich

 

INOX TERRA HP 40       DN 25          5 m          INOX TERRA HP 40       DN 32          5 m

INOX TERRA HP 40       DN 25       7,5 m          INOX TERRA HP 40       DN 32       7,5 m

INOX TERRA HP 40       DN 25        10 m          INOX TERRA HP 40       DN 32        10 m

INOX TERRA HP 40       DN 25        12 m          INOX TERRA HP 40       DN 32        12 m

INOX TERRA HP 40       DN 25        14 m          INOX TERRA HP 40       DN 32        14 m

INOX TERRA HP 40       DN 25      17,5 m         INOX TERRA HP 40       DN 32     17,5 m

INOX TERRA HP 40       DN 25        20 m          INOX TERRA HP 40       DN 32        20 m

INOX TERRA HP 40       DN 25        25 m          INOX TERRA HP 40       DN 32        25 m

 

INOX TERRA HP 40       DN 40          5 m

INOX TERRA HP 40       DN 40       7,5 m

INOX TERRA HP 40       DN 40        10 m

INOX TERRA HP 40       DN 40        12 m

INOX TERRA HP 40       DN 40        14 m

 

System accessories for AEROLINE INOX TERRA HP 40


Optional accessories for AEROLINE INOX TERRA HP 40

nmc Deutschland GmbH - Niederlassung Ulm - Im Lehrer Feld 30 - DE-89081 Ulm - Tel.: +49-731-93292-50 - info-ulm@nmc-deutschland.de