AEROLINE® INOX TERRA HP SPLIT

For heat pumps in SPLIT version.

Terra WP Split


Complete system with pre-insulated twin tubes and two integrated
power cable installation tubes


Connection from the heat pump inside the building to the unit outside

Protection against near-surface thermal loss in summer

Simple and fast installation

Heat pump piping system, consisting of:

Jacket pipe made of PE-HD; two corrugated stainless steel tubes (feed and return);

AEROFLEX insulation of EPDM, two electric power installation tubes 25;

two underground warning tapes (heating line/power cable).

The entire system is appropriate for water and water-tyfocor mixtures with a maximum temperature

range of -30°C up to +95°C.

Thermal protection:

Reference values of thermal conductivity at +40 °C, λ40°C = 0,040 (0,037*) W/mK,

at 0 °C, λ0°C = 0,033 W/mK.

Corrugated stainless steel tube:

Material no. 1.4404; maximum working pressure at 95°C DN 25/10 bar, DN 32/6,5 bar, DN 40/4,4 bar;
Bursting pressure: DN 25 higher 33 bar, DN 32/DN 40 higher 20 bar.

Jacket pipe:

The double-walled cable liner pipe is made of PE-HD; the ring stiffness is according to
DIN 16961, SR24≥ 16,0 kN/m2;

Minimum bending radius 36 cm (DN 25) and 42,5 cm (DN 32/DN40).

Power installation tube:

Two Power installation tubes 25 (inner diam.18 mm) according to DIN EN 50086,

for control, sensor or power cable.

Insulation AEROFLEX-tube, made of EPDM: Light, flexible, closed-cell synthetic rubber; free of PVC and CFC. Building material code: B2 according to DIN 4102.

No embrittlement of copper and stainless steel tubes according toDIN 1988 Part 7;


The tubes are marked in order to avoid confusion between feed and return.

 

*exact measurde values FIW-Munich


INOX TERRA HP SPLIT       DN 25          5 m          INOX TERRA HP SPLIT       DN 32          5 m
INOX TERRA HP SPLIT       DN 25       7,5 m          INOX TERRA HP SPLIT       DN 32       7,5 m
INOX TERRA HP SPLIT       DN 25        10 m          INOX TERRA HP SPLIT       DN 32        10 m
INOX TERRA HP SPLIT       DN 25        12 m          INOX TERRA HP SPLIT       DN 32        12 m
INOX TERRA HP SPLIT       DN 25        14 m          INOX TERRA HP SPLIT       DN 32        14 m
INOX TERRA HP SPLIT       DN 25     17,5 m         INOX TERRA HP SPLIT        DN 32     17,5 m
INOX TERRA HP SPLIT       DN 25        20 m          INOX TERRA HP SPLIT       DN 32        20 m
INOX TERRA HP SPLIT       DN 25        25 m          INOX TERRA HP SPLIT       DN 32        25 m
 
INOX TERRA HP SPLIT       DN 40          5 m
INOX TERRA HP SPLIT       DN 40       7,5 m
INOX TERRA HP SPLIT       DN 40        10 m
INOX TERRA HP SPLIT       DN 40        12 m
INOX TERRA HP SPLIT       DN 40        14 m
INOX TERRA HP SPLIT       DN 40     17,5 m
INOX TERRA HP SPLIT       DN 40        20 m
INOX TERRA HP SPLIT       DN 40        25 m

 

System accessories for AEROLINE INOX TERRA HP SPLIT


Optional accessories for AEROLINE INOX TERRA HP SPLIT

nmc Deutschland GmbH - Niederlassung Ulm - Im Lehrer Feld 30 - DE-89081 Ulm - Tel.: +49-731-93292-50 - info-ulm@nmc-deutschland.de